<script>on mouseUpput cd field name into foo2get the short name of this cardput it into foo1if it is "savedscores" thenanswer "Can't delete this savedscores card" with "Cancel"exit mouseUpend ifif foo2 is empty thenanswer "Can't delete card with no Username" with "Cancel"exit mouseUpend ifput "report_" & foo2 into fooget userlevelput it into savedlevelset the userlevel to 5get foogo card itdoMenu "Delete Card"put "savedscores_" & foo2 into fooget foogo card itdoMenu "Delete Card"go card reportset the userlevel to savedlevelend mouseUp</script>
</part>
<part>
<id>6</id>
<type>button</type>
<visible> <false /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>417</left>
<top>11</top>
<right>496</right>
<bottom>55</bottom>
</rect>
<style>transparent</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>1007</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Print Score</name>
<script>on mouseUplock screenopen printingput "report_" & cd field name into foopush cardget foogo card itprint this cardpop cardprint this cardclose printingunlock screenend mouseUp</script>
<script>on mouseUpglobal questlist -- question # optionif field qmissed of card report is empty thenanswer "Perfect score! No need to review." with "OK"exit mouseUpend ifput field qmissed of card report into numWrongrepeat with x=1 to the number of items of numWrongput empty into field qmissed of card reportget item x of numWrongget item it of questlist -- only required for question # optiongo card itreViewend repeatgo card reportput numWrong into field qmissed of card reportend mouseUp</script>
</part>
<part>
<id>3</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>240</left>
<top>296</top>
<right>334</right>
<bottom>323</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>no, new test</name>
<script>on mouseUpglobal score,lockkeyput empty into field "QMissed"put empty into scoreput false into lockkeygo first cardend mouseUp</script>
</part>
<part>
<id>4</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>413</left>
<top>290</top>
<right>492</right>
<bottom>334</bottom>
</rect>
<style>transparent</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>1007</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Print Score</name>
<script>on mouseUplock screenopen printingprint this cardput field QMissed&"," into field QMissedbuild_savedscoresprint this cardclose printinggo card reportunlock screenend mouseUp</script>
</part>
<part>
<id>12</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>421</left>
<top>133</top>
<right>487</right>
<bottom>189</bottom>
</rect>
<style>transparent</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>12451</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>save scores</name>
<script>on mouseUpglobal usernameput "This will create card savedscores_" & username into fooanswer foo with "OK" or "Cancel"if it is "Cancel" thenexit mouseUpend ifget userlevelput it into savedlevelset the userlevel to 5savescset the userlevel to savedlevelend mouseUp</script>
<script>on openCardglobal immediate,questlist,questkey,questans,firstentry--** if necessary to save this card, copy card, rename by adding--** "_name" to end of card name, then delete from here down to --**put false into immediateput the long time into field "stop"put empty into scoreput empty into field qmissedrepeat with i=1 to number of items of questlistif item i of questans = item i of questkey thenadd 1 to scoreelseput field qmissed & i & "," into field qmissed--put field qmissed & item i of questlist & "," into field qmissedend ifend repeatset lockscreen to truedelete last character of field qmissed--** and put correct score in next line (and uncomment)--** put 22 into score -- replace 22 with correct score--** also copy card savedscores, rename by adding "_name", and--** edit script for the print button to call correct card namesif score is empty then put "0" into field "correct"else put score into field "correct"put the number of items of questlist into field "Q#"if field "Q#" > 0 thenput score*100/field "Q#" & "%" into field "Percent"put score*100/field "Q#" into fooelseput "0%" into field "Percent"put "0" into fooend ifif foo >= 90 then play applauseend opencardon build_savedscoresglobal questlist,questansglobal usernameput empty into savedscore1put empty into savedscore2put empty into savedscore3repeat with i=1 to number of items of questlistif i < 18 thenput savedscore1&item i of questans&return into savedscore1else if i < 35 thenput savedscore2&item i of questans&return into savedscore2elseput savedscore3&item i of questans&return into savedscore3end ifend repeatgo card savedscoresput username into cd field nameput the date into cd field dateput savedscore1 into field ans1put savedscore2 into field ans2put savedscore3 into field ans3end build_savedscoreson savescglobal usernamedoMenu "Copy Card"doMenu "Paste Card"set name of this card to "report_" & usernameset cantDelete of this card to falseset the script of this card to emptyset the script of button "save scores" to emptyset the script of button "Print Score" to emptybuild_savedscoresdoMenu "Copy Card"doMenu "Paste Card"set name of this card to "savedscores_" & usernameset cantDelete of this card to falseset the script of this card to emptyshow button "Delete Saved"show button "Print Score"go card reportend savesc</script>
</card>
card_83138.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9D11: What standing-wave-ratio will result from the connection of a 50-ohm feedline to a resonant antenna having a 50-ohm feed-point impedance?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>2:1</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>50:50</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>0:0</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>1:1</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-18</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<name>#290</name>
<script>on openCardglobal group,rightoneput 25 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_82764.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9D10: What standing-wave-ratio will result from the connection of a 50-ohm feedline to a resonant antenna having a 10-ohm feed-point impedance?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>2:1</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>50:1</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>1:5</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>5:1</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-18</text>
</content>
<name>#289</name>
<script>on openCardglobal group,rightoneput 25 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_82633.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9D09: What standing-wave-ratio will result from the connection of a 50-ohm feedline to a resonant antenna having a 200-ohm feed-point impedance?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>4:1</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>1:4</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>2:1</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>1:2</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-18</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<name>#288</name>
<script>on openCardglobal group,rightoneput 25 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_82343.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9D07: If a 160-meter signal and a 2-meter signal pass through the same coaxialcable, how will the attenuation of the two signals compare?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>It will be greater at 2 meters</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>It will be less at 2 meters</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>It will be the same at both frequencies</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>It will depend on the emission type in use</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-15</text>
</content>
<name>#286</name>
<script>on openCardglobal group,rightoneput 25 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_81367.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9D06: If a center-fed dipole antenna is fed by a parallel-conductor feed line, howwould an inductively coupled matching network be used between the two?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>It would not normally be used with parallel-conductor feed lines</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>It would be used to increase the SWR to an acceptable level</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>It would be used to match the unbalanced transmitter output to thebalanced parallel-conductor feed line</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>It would be used at the antenna feed point to tune out the radiationresistance</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-19</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<name>#285</name>
<script>on openCardglobal group,rightoneput 25 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_80928.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9C11: If you are transmitting from a ground-mounted vertical antenna, which ofthe following is an important reason for people to stay away from it?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>To avoid skewing the radiation pattern</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>To avoid changes to the antenna feed-point impedance</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>To avoid excessive grid current</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>To avoid exposure to RF radiation</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-4</text>
</content>
<name>#279</name>
<script>on openCardglobal group,rightoneput 24 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_79466.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9C09: If a slightly longer parasitic element is places 0.1 wavelength away from anHF dipole antenna, what effect will this have on the antenna's radiationpattern?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>The radiation pattern will not be affected</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>A major lobe will develop in the horizontal plane, away from the parasiticelement, toward the dipole</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>A major lobe will develop in the vertical plane, away from the ground</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>A major lobe will develop in the horizontal plane, parallel to the twoelements</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-8</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<name>#277</name>
<script>on openCardglobal group,rightoneput 24 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_78893.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9C08: If a slightly shorter parasitic element is placed 0.1 wavelength away from anHF dipole antenna, what effect will this have on the antenna's radiationpattern?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>The radiation pattern will not be affected</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>A major lobe will develop in the horizontal plane, parallel to the twoelements</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>A major lobe will develop in the vertical plane, away from the ground</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>A major lobe will develop in the horizontal plane, toward the parasiticelement</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-8</text>
</content>
<name>#276</name>
<script>on openCardglobal group,rightoneput 24 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_78641.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9C05: What happens to the feed-point impedance of a ground-plane antennawhen its radials are changed from horizontal to downward sloping?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>It decreases</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>It increases</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>It stays the same</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>It approaches zero</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-5</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<name>#273</name>
<script>on openCardglobal group,rightoneput 24 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_77975.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G9B09: Moving the feed point of a multielement quad antenna from a side parallelto ground to a side perpendicular to the ground will have what effect?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>It will significantly increase the antenna feed-point impedance</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>It will significantly decrease the antenna feed-point impedance</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>It will change the antenna polarization from vertical to horizontal</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>It will change the antenna polarization from horizontal to vertical</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 9-14</text>
</content>
<name>#266</name>
<script>on openCardglobal group,rightoneput 23 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_76138.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G8B04: What is the name of the stage in a VHF FM transmitter that selects aharmonic of an HF signal to reach the desired operating frequency?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Mixer</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Reactance modulator</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Preemphasis network</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Multiplier</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 8-14</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<name>#239</name>
<script>on openCardglobal group,rightoneput 21 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_69067.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G8B02: If a receiver mixes a 13.800-MHz VFO with a 14.255-MHz received signalto produce a 455-kHz intermediate frequency (IF) signal, what type ofinterference will a 13.345-MHz signal produce in the receiver?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Local oscillator</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Image response</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Mixer interference</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Intermediate interference</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 8-9</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<name>#237</name>
<script>on openCardglobal group,rightoneput 21 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_68453.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G8B01: What receiver stage combines a 14.25-MHz input signal with a 13.795-MHzoscillator signal to produce a 455-kHz imtermediate frequency (IF) signal?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Mixer</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>BFO</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>VFO</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Multiplier</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 8-8</text>
</content>
<name>#236</name>
<script>on openCardglobal group,rightoneput 21 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_68195.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G7A11: In a single-sideband phone superheterodyne receiver, what circuitprocesses signals from the IF filter and sends signals to the detector?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>RF oscillator</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>IF amplifier</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Mixer</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>BFO</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 7-13</text>
</content>
<name>#224</name>
<script>on openCardglobal group,rightoneput 19 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_65133.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G7A10: In a single-sideband phone superheterodyne receiver, what circuitprocesses signals from the IF amplifier and the BFO and sendssignals to the AF filter?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>RF oscillator</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>IF filter</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Balanced modulator</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Detector</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 7-13</text>
</content>
<name>#223</name>
<script>on openCardglobal group,rightoneput 19 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_64797.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G7A09: In a single-sideband phone superheterodyne receiver, what circuitprocesses signals from the RF amplifier and the local oscillator and sendssignals to the IF filter?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Balanced modulator</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>IF amplifier</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Mixer</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Detector</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 7-13</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<name>#222</name>
<script>on openCardglobal group,rightoneput 19 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_64571.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G7A07: In a typical single-sideband phone transmitter, what circuit processessignals from the balanced modulator and send signals to the mixer?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Carrier oscillator</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Filter</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>IF amplifier</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>RF amplifier</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 7-12</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<name>#220</name>
<script>on openCardglobal group,rightoneput 19 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_64088.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G6A03: What type of capacitor is used in power supply circuits to filter transientvoltage spikes across the transformer secondary winding?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>High-value</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Trimmer</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Vacuum variable</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Suppressor</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 6-6</text>
</content>
<name>#205</name>
<script>on openCardglobal group,rightoneput 18 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_60268.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G5B14: A DC voltage to what value of an applied sine wave AC voltage would produce the same amount of heat over time in a resistive element?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>The peak-to-peak value</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>The RMS value</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>The average value</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>The peak value</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 5-4</text>
</content>
<name>#200</name>
<script>on openCardglobal group,rightoneput 17 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_58766.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G5B13: What is the impedance of a speaker which requires a transformer with a turnsratio of 24 to 1 to match an audio amplifier having an output impedance of2000 ohms?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>576 ohms</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>83.3 ohms</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>7.0 ohms</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>3.5 ohms</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 5-26</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<name>#199</name>
<script>on openCardglobal group,rightoneput 17 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_58568.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G5B12: What is the turns ratio of a transformer to match an audio amplifier having a600-ohm output impedance to a speaker having a 4-ohm impedance?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>12.2 to 1</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>24.4 to 1</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>150 to 1</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>300 to 1</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 5-26</text>
</content>
<name>#198</name>
<script>on openCardglobal group,rightoneput 17 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_58229.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G5B07: In a parllel circuit with a voltage source and several branch resistors, howis the total current related to the current in the branch resistors?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>It equals the average of the branch current through each resistor</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>It equals the sum of the branch current through each resistor</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>It decreases as more parallel resistors are added to the circuit</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>It is the sum of each resistor's voltage drop multipied by the total number of resistors</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 5-7</text>
</content>
<name>#193</name>
<script>on openCardglobal group,rightoneput 17 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_57031.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G5B06: If a 1.0 ampere current source is connected to two parllel-connected 10-ohm resistors, how much current passes through each resistor?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>10 amperes</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>2 amperes</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>1 amperes</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>0.5 amperes</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 5-8</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<name>#192</name>
<script>on openCardglobal group,rightoneput 17 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_56664.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G5B05: If a signal-strength report is "20dB over S9", what should the report be ifthe transmitter power is reduced from 1500 watts to 15 watts?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>S5</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>S7</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>S9</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>S9 plus 10 dB</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 5-14</text>
</content>
<name>#191</name>
<script>on openCardglobal group,rightoneput 17 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_56494.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G5B04: If a signal-strength report is "10dB over S9", what should the report be ifthe transmitter power is reduced from 1500 watts to 150 watts?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>S5</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>S7</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>S9</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>S9 plus 5 dB</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 5-14</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<name>#190</name>
<script>on openCardglobal group,rightoneput 17 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_56220.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4E01: Depending on the wavelength of the signal, the energy density of the RF field, and other factors, in what way can RF energy affect body tissue?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>It heats the tissue</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>It causes radiation poisoning</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>It causes bloodflow to stop</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>It produces genetic changes in the tissue</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-21</text>
</content>
<name>#165</name>
<script>on openCardglobal group,rightoneput 15 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_49705.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4D06: What is the output PEP of an unmodulated carrier transmitter if an average-reading wattmeter connected to the transmitter output indicates 1060 watts?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>530 watts</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>1060 watts</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>1500 watts</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>2120 watts</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-11</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<name>#159</name>
<script>on openCardglobal group,rightoneput 14 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_48328.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4D05: What is the output PEP of a transmitter if an oscilloscope measures500 volts peak-to-peak across a 50-ohm resistor connected to thetransmitter output?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>500 watts</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>625 watts</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>1250 watts</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>2500 watts</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-11</text>
</content>
<name>#158</name>
<script>on openCardglobal group,rightoneput 14 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_47886.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4D04: What is the output PEP of a transmitter if an oscilloscope measures200 volts peak-to-peak across a 50-ohm resistor connected to thetransmitter output?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>100 watts</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>200 watts</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>400 watts</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>1000 watts</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-10</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<name>#157</name>
<script>on openCardglobal group,rightoneput 14 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_47806.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4D03: How is the output PEP of a transmitter calculated if an oscilloscope is usedto measure the transmitter's peak load voltage across a resistive load?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>PEP = [(VP)(VP)]/(RL)</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>PEP = [(0.707 PEV)(0.707 PEV)]/(RL)</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>PEP = (VP)(VP)(RL)</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>PEP = [(1.414 PEV)(1.414 PEV)]/(RL)</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-10</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<name>#156</name>
<script>on openCardglobal group,rightoneput 14 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_47363.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4C06: If your third floor amateur station has a ground wire running 33 feet down toa ground rod, why might you get an RF burn if you touch the front panel ofyour HF transceiver?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Because the ground rod is not making good contact with moist earth</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Because the transceiver's heat-sensing circuit is not working to start thecooling fan</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Because of a bad antenna connection, allowing RF energy to take aneasier path our of the transceiver through you</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Because the ground wire is a resonant length on several HF bands andacts moore like an antenna than an RF ground connection</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-16</text>
</content>
<name>#148</name>
<script>on openCardglobal group,rightoneput 13 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_45173.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4B11: By how many times must the power output of a transmitter be increased to raise the S-meter reading in a nearby receiver from S8 to S9?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Approximately 2 times</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Approximately 3 times</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Approximately 4 times</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Approximately 5 times</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-12</text>
</content>
<name>#142</name>
<script>on openCardglobal group,rightoneput 12 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_43747.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4B06: What signal source is connected to the vertical input of a monitoringoscilloscope when checking the quality of a transmitted signal?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>The IF output of a monitoring receiver</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>The audio input of the transmitter</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>The RF signals of a nearby receiving antenna</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>The RF output of the transmitter</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-3</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<name>#137</name>
<script>on openCardglobal group,rightoneput 12 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_42305.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4A04: What measurement can be made of a single-sideband phone transmitter'samplifier by performing a two tone test using an oscilloscope?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Its percent of frequency modulation</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Its percent of carrier phase shift</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Its frequency diviation</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Its linearity</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-5</text>
</content>
<name>#124</name>
<script>on openCardglobal group,rightoneput 11 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_39156.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4A02: When testing the amplitude linearity of a single-sideband phone transmitter, what kind of audio tones are fed into the microphone input and on what kind ofinstrument is the output observed?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Two harmonically related tones are fed in, and the output is observed onan oscilloscope</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Two harmonically related tones are fed in, and the output is observed ona distortion analyzer</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Two non-harmonically related tones are fed in, and the output is observed on an oscilloscope</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Two non-harmonically related tones are fed in, and the output is observed on a distortion analyzer</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-5</text>
</content>
<name>#122</name>
<script>on openCardglobal group,rightoneput 11 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_38630.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G4A01: What kind of input signal is used to test the amplitude linearity of a single-sideband phone transmitter while viewing the output on an oscilloscope?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Normal speech</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>An audio-frequency sine wave</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Two audio-frequency sine waves</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>An audio-frequency square wave</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 4-5</text>
</content>
<name>#121</name>
<script>on openCardglobal group,rightoneput 11 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_38259.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3C09: What type of radio-wave propagation allows a signal to be detected at adistance too far for ground-wave propagation but too near for normal sky-wave propagation?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Ground wave</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Scatter</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Sporadic-E skip</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Short-path skip</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-13</text>
</content>
<name>#118</name>
<script>on openCardglobal group,rightoneput 10 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_37504.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3C05: What is the main reason the 160-, 80- and 40-meter amateur bands tend tobe useful only for short-distance communications during daylight hours?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Because of lack of activity</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Because of auroral propagation</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Because of D-region absorption</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Because of magnetic flux</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-4</text>
</content>
<name>#114</name>
<script>on openCardglobal group,rightoneput 10 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_36375.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3B05: What usually happens to radio waves with frequencies below the maximumusable frequency (MUF) when they are sent into the ionosphere?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>They are bent back to earth</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>They pass through the ionosphere</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>They are completely absorbed by the ionosphere</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>They are chasnged to a frequency above the MUF</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-6</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<name>#103</name>
<script>on openCardglobal group,rightoneput 9 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_33719.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3B04: What is one way to determine if the maximum usable frequency (MUF) ishigh enough to support 28 MHZ propagation between your station andwestern Europe?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Listen for signals on the 10 meter beacon frequency</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Listen for signals on the 20 meter beacon frequency</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Listen for signals on the 39 meter broadcast frequency</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Listen for WWVH time signals on 20 MHz</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-9</text>
</content>
<name>#102</name>
<script>on openCardglobal group,rightoneput 9 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_33340.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3B03: If the maximum usable frequency (MUF) is high and HF radio-wavepropagation is generally good for several days, a similar condition canusually be expected how many days later?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>7</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>14</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>28</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>90</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-8</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<name>#101</name>
<script>on openCardglobal group,rightoneput 9 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_33171.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3B02: If the maximum usable frequency on the path from Ohio to Germany is17 MHz, which band should offer the best chance for a successful contact?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>80 meters</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>40 meters</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>20 meters</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>2 meters</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-7</text>
</content>
<name>#100</name>
<script>on openCardglobal group,rightoneput 9 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_32823.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3B01: If the maximum usable frequency on the path from Minnesota to France is22 MHz, which band should offer the best chance for a successful contact?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>10 meters</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>15 meters</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>20 meters</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>40 meters</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-7</text>
</content>
<name>#99</name>
<script>on openCardglobal group,rightoneput 9 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_32614.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G3A03: How long does it take the increased ultraviolet and X-ray radiation fromsolar flares to affect radio-wave propagation on the earth?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>The effect is instantaneous</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>1.5 seconds</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>8 minutes</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>20 to 40 hours</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 3-9</text>
</content>
<name>#90</name>
<script>on openCardglobal group,rightoneput 8 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_30010.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2C04: If a disaster disrupts normal communication in an area, what would theFCC include in any notice of a temporary state of communicationemergency?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Any additional test questions needed for the licensing of amateuremergency communications workers</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>A list of organizations authorized to temporarily seize your equipment fordisaster communications</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Any special conditions requiring the use of non-commercial powersystems</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Any special conditions and special rules to be observed by stationsduring the emergency</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-16</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<name>#80</name>
<script>on openCardglobal group,rightoneput 7 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_27609.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2C02: During a disaster in the US, when may an amateur station maketransmissions necessary to meet essential communication needs and assistrelief operations?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>When normal communication systems are overloaded, damaged or disrupted</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Only when the local RACES net is activated</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Never, only official emergency stations may transmit in a disaster</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>When normal communication systems are working but are notconvenient</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-16</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<name>#78</name>
<script>on openCardglobal group,rightoneput 7 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_27052.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2C01: What means may an amateur station in distress use to attract attention,make known its condition and location, and obtain assistance?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Only Morse code signals sent on internationally recognized emergencychannels</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Any means of radiocommunication, but only on internationally recognizedemergency channels</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Any means of radiocommunication</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Only those means of radiocommunication for which the station islicensed</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-13</text>
</content>
<name>#77</name>
<script>on openCardglobal group,rightoneput 7 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_26634.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2B09: A directional antenna pointed in the long-path direction to another station isgenerally oriented how many degrees from its short-path heading?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>45 degrees</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>90 degrees</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>180 degrees</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>270 degrees</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-11</text>
</content>
<name>#74</name>
<script>on openCardglobal group,rightoneput 6 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_25862.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2B06: When selecting a RTTY transmitting frequency, what minimum frequencyseparation from a contact in progress should you allow (center to center) tominimize interference?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>60 Hz</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>250 to 500 Hz</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Approximately 3 kHz</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Approximately 6 kHz</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-10</text>
</content>
<name>#71</name>
<script>on openCardglobal group,rightoneput 6 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_25222.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2B05: When selecting a single-sideband phone transmitting frequency, whatminimum frequency separation from a contact in progress should you allow(between suppressed carriers) to minimize interference?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>150 to 500 Hz</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Approximately 3 kHz</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Approximately 6 kHz</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Approximately 10 Khz</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-10</text>
</content>
<name>#70</name>
<script>on openCardglobal group,rightoneput 6 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_24980.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2B04: When selecting a CW transmitting frequency, what minimum frequencyseparation from a contact in progress should you allow to minimizeinterference?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>5 to 50 Hz</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>150 to 500 Hz</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>1 to 3 kHz</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>3 to 6 kHz</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-10</text>
</content>
<name>#69</name>
<script>on openCardglobal group,rightoneput 6 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_24751.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2B03: If propagation changes during your contact and you notice increasing interference from other activity on the same frequency, what should you do?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Tell the interfering stations to change frequency, since you were therefirst</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Report the interference to your local Amateur Auxiliary Coordinator</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Turn on your amplifier to overcome the interference</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Move your contact to another frequency</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-10</text>
</content>
<name>#68</name>
<script>on openCardglobal group,rightoneput 6 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_24571.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G2B01: If you are the net control station of a daily HF net, what should you do if thefrequency on which you normally meet is in use just before the net begins?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Reduce your output power and start the net as usual</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Increase your power output so that net participants will be able to hearyou over the existing activity</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Cancel the net for that day</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Conduct the net on a frequency 3 to 5 kHz away from the regular netfrequency</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>General Manual 2-10</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is D</text>
</content>
<name>#66</name>
<script>on openCardglobal group,rightoneput 6 into groupput "D" into rightonepass openCardend openCard</script>
</card>
card_23828.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G1D11: If you are a Technician licensee with a Certificate of Successful Completionof Examination (CSCE) for General privileges, when must you add thespecial identifier "AG" after your call sign?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Whenever you operate using your new frequency privileges</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Whenever you operate</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Whenever you operate using Technician privileges</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>A special identifier is not required al long al your General class licenseapplication has been filed with the FCC</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>§ 97.119e2; General Manual 1-15</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is A</text>
</content>
<name>#54</name>
<script>on openCardglobal group,rightoneput 4 into groupput "A" into rightonepass openCardend openCard</script>
</card>
card_20964.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G1D10: If you are a Technician licensee with a Certificate of Successful Completionof Examination (CSCE) for General privileges, how do you identify yourstation when transmitting phone emissions on 14.325 MHz?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>No special form of identification is needed</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>You may not operate on 14.325 MHz until your new license arrives</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>You must give your call sign, followed by any suitable word that denotesthe slant mark and the identifier "AG"</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>You must give your call sign and the location of the VE examinationwhere you obtained the CSCE</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>§ 97.119e2; General Manual 1-15</text>
</content>
<name>#53</name>
<script>on openCardglobal group,rightoneput 4 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_20557.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G1D09: If you are a Technician licensee with a Certificate of Successful Completionof Examination (CSCE) for General privileges, how do you identify yourstation when transmitting on 14.035 MHz?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>You must give your call sign and the location of the VE examinationwhere you obtained the CSCE</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>You must give your call sign, followed by the slant mark "/", followedby the identifier "AG"</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>You may not operate on 14.035 MHz until your new license arrives</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>No special form of identification is needed</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>§ 97.119e2; General Manual 1-15</text>
</content>
<name>#52</name>
<script>on openCardglobal group,rightoneput 4 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_20429.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G1C07: Without a grant of FCC type acceptance, how many external RF power amplifiersof a given design capable of operation below 144 MHz may you build ormodify in one claendar year?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>None</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>1</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>5</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>10</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>§ 97.315a; General Manual 1-13</text>
</content>
<name>#39</name>
<script>on openCardglobal group,rightoneput 3 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_16983.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G1B06: When may an amateur station in two-way communication transmit amessage in a secret code in order to obscure the meaning of thecommunication?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>There are no restrictions</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>They may be used if they do not obscure the meaning of a message</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>They are not permitted because they obscure the meaning of a messageto FCC monitoring stations</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Only"10-codes" are permitted</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is C</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>§ 97.113a4; General Manual 1-11</text>
</content>
<name>#27</name>
<script>on openCardglobal group,rightoneput 2 into groupput "C" into rightonepass openCardend openCard</script>
</card>
card_14071.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>G1A20: What name is given to a form of interference that seriously degrades,obstructs or repeatedly interrupts a radiocommunication service?</text>
</content>
<content>
<layer>background</layer>
<id>11</id>
<text>Intentional interference</text>
</content>
<content>
<layer>background</layer>
<id>27</id>
<text>Harmful interference</text>
</content>
<content>
<layer>background</layer>
<id>28</id>
<text>Adjacent interference</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>Disruptive interference</text>
</content>
<content>
<layer>background</layer>
<id>43</id>
<text>Correct answer is B</text>
</content>
<content>
<layer>background</layer>
<id>44</id>
<text>§ 97.3a21; General Manual 1-6</text>
</content>
<name>#20</name>
<script>on openCardglobal group,rightoneput 1 into groupput "B" into rightonepass openCardend openCard</script>
</card>
card_12096.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1"> </span><span class="style4">General Ham Test Version 5.0</span><span class="style1">This program was originally written in HyperCard version 1.2 by KC1SCP. The same basic design has been implemented in HyperCard version 2.3 as a stand alone application. You therefore no longer need HyperCard to use this program. Currently, each ham test is a separate program. If you are making rapid progress, make sure you get the additional simulators you need to get to the top.This stack is an example of how to administer a timed test, score it, and provide the test taker with the option to review those questions that were incorrect. The General Ham Stack is a </span><span class="style4">25</span><span class="style1">-question randomly generated interactive test. The questions include the entire 286 questions supplied by ARRL for Element 3B.When "Immediate Feedback" box is checked, then if the wrong answer is chosen, upon pressing the Next or Previous arrows, the correct answer is displayed. If immediate feedback is not desired, then uncheck the box. A review of incorrect answers may also be obtained after the completion of the entire test. A report is displayed upon completion of the test showing amount of time it took, the questions answered incorrectly, and percentage and number of questions answered correctly. This report, along with an answer key, may be printed.You should compact the stack about once every dozen tests.If you like this or have suggestions for improvements, let me know.If you'd like more information about hams that use Mac computers, consider:"Macnet Roster" (ver. 678) has just been updated and is now also stand-alone HyperCard application! The version number = the number of records."Macnet Roster" lists: o CALL SIGN @ HOME PBBS o FULL NAME o ADDRESS o CITY, STATE, ZIP o INTERNET ADDRESS o MACS USED o RADIOS USED o SOFTWARE USED o PASSIONS o COMMENTSof every known amateur radio operator in the world that uses a Mac computer. You can use "Macnet Roster" to find other Mac users that you can then communicate with directly. Compare notes on software, applications, ideas,hints and kinks, and make new ham friends that use the same computer you do. (You already know how cool you are - imagine accessing "the rest of us"!) If you'd like the latest "Macnet Roster":Send me a formatted disk in a self addressed and stamped disk mailerthat is in a large envelope clearly marked "ROSTER". Put YOUR INFO (via EMAIL or disk using TEACH TEXT) if you'd like to be included in the "Macnet Roster" or send an update to your stats to me via pkt or emailanytime. And good luck with your test(s)!73,John Seney, WD1V @ WB1DSW.NH.USA.NA144 Pepperidge DriveManchester, NH 03103Internet: john@wd1v.mv.comAOL: jseney</span></text>
</content>
<content>
<layer>card</layer>
<id>5</id>
<text>Simulator Info</text>
</content>
<name>About....</name>
<script></script>
</card>
card_3775.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<script>on mouseUpglobal immediateif hilite of button "Immediate Review" is false thenput true into immediateset hilite of button "Immediate Review" to trueelseput false into immediateset hilite of button "Immediate Review" to falseend ifend mouseUp</script>
</part>
<part>
<id>11</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>441</left>
<top>285</top>
<right>505</right>
<bottom>338</bottom>
</rect>
<style>transparent</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>1007</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>print test</name>
<script>on mouseUpglobal questlistshow card field waitpleaselock screengo to card Kprint this cardopen printing with dialogrepeat with i = 1 to number of items of questlistput item i of questlist into thisquestgo to card thisquestprint this cardend repeatclose printinggo to first cardunlock screenhide card field waitpleaseend mouseUp</script>
<script>on mouseUppush this cardvisual effect iris opengo to card "About...."set the scroll of card field id 3 to 0end mouseUp</script>
</part>
<part>
<id>18</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>293</left>
<top>310</top>
<right>393</right>
<bottom>332</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Compact Stack</name>
<script>on mouseUpget userlevelput it into tempset userlevel to 5doMenu "Compact Stack"set userlevel to tempend mouseUp</script>
</part>
<content>
<layer>card</layer>
<id>12</id>
<text>PLEASE BE PATIENTTHIS PROCESS TAKES TIME....</text>
</content>
<content>
<layer>card</layer>
<id>15</id>
<text>PLEASE BE PATIENT,THIS PROCESS MAY TAKE SEVERAL MINUTES …</text>
</content>
<content>
<layer>background</layer>
<id>5</id>
<text>WD1V's Ham Test SimulatorGeneral ClassValid Until July 1998</text>
</content>
<name>EXAM</name>
<script>on openCardglobal immediate,lockkeyset hilite of button "Immediate Review" to trueshow card field waitpleaseif lockkey is false thenbuildListend ifhide card field waitpleaseend openCard</script>